mohshaheen
Junior Member
hello
i am bulling my first custom build quadcopter , after playing with a DJI for 2 years i need to have a custom build and reasonable cost unit ,i have complied the following specs but not sure
if the motors could be mounted on the frame ? ,
ESC is good? calculated flight time of 15mintues is achievable ?
does the X525 frame is the best choice for a foldable and lightweight frame ?
RCTimer 5010 - 360Kv
RCTimer 17x5.5 CF Props
Turnigy Plush 12A ESC's running BLHeli firmware
KK MK X525 V3 QuadCopter Folding Frame Friber Glass MultiCoptor Red/Balck
GPS
SkyZone TS353 5.8G 400mW FPV Transmitter
SONY CCD 1/3inch Camera
HK Plot32-PIXHAWK clone
minimum OSD
Telemetry
battery 3s 3300 mah 25C - DUPU , might be replaced with Panasonic LiION as in this post :http://flitetest.com/articles/ncr18650b-test-flight
AUW :1.45 KG
the motor and props and ESC combinations are from this post :
http://diydrones.com/profiles/blog/list?user=1v4120qd5ui64
i am bulling my first custom build quadcopter , after playing with a DJI for 2 years i need to have a custom build and reasonable cost unit ,i have complied the following specs but not sure
if the motors could be mounted on the frame ? ,
ESC is good? calculated flight time of 15mintues is achievable ?
does the X525 frame is the best choice for a foldable and lightweight frame ?
RCTimer 5010 - 360Kv
RCTimer 17x5.5 CF Props
Turnigy Plush 12A ESC's running BLHeli firmware
KK MK X525 V3 QuadCopter Folding Frame Friber Glass MultiCoptor Red/Balck
GPS
SkyZone TS353 5.8G 400mW FPV Transmitter
SONY CCD 1/3inch Camera
HK Plot32-PIXHAWK clone
minimum OSD
Telemetry
battery 3s 3300 mah 25C - DUPU , might be replaced with Panasonic LiION as in this post :http://flitetest.com/articles/ncr18650b-test-flight
AUW :1.45 KG
the motor and props and ESC combinations are from this post :
http://diydrones.com/profiles/blog/list?user=1v4120qd5ui64