WhiteWalker
New member
Both fly amazing, both planes are solidly designed aside from having to strengthen the Racer's firewall. I think next build will be the Bronco finished with Vietnam era camo.
Only mods on FT Racer were beefing-up firewall and gluing a length of popsicle stick between the elevator sides, I was leery of the foam connector. I also used the template to cut clear plastic to make a proper canopy. I save clear plastic from packaging for things I buy, it is a perfect thickness for modelling.
On the FT Versa (FT-117) I obviously added the enclosure on top to hide all the electronics. The front of the box is open on the front sides for cooling, air exits at the rear like the full size version.
Hope you like my mods/finishing...
Only mods on FT Racer were beefing-up firewall and gluing a length of popsicle stick between the elevator sides, I was leery of the foam connector. I also used the template to cut clear plastic to make a proper canopy. I save clear plastic from packaging for things I buy, it is a perfect thickness for modelling.
On the FT Versa (FT-117) I obviously added the enclosure on top to hide all the electronics. The front of the box is open on the front sides for cooling, air exits at the rear like the full size version.
Hope you like my mods/finishing...