jamesrod13
New member
Hi Guys,
I'm having a problem with my motors where they don't spin up at the same time and don't spin in sync either.
I'm have the RTF JJRC JJPRO P200 Quad and it has EMAX 20A Lighning ESCs and a EMAX Skyline 32 fc.
I flashed the ESCs and FC with the most recent firmware and calibrated the ESCs in Betaflight mutipe times. When I throttle up once I arm it the motors start at different times and then are out of sync.
Motor 1= at 1/12 throttle it goes up to 1260- gets to max at 5/6
Motor 2= at 1/12 throttle it goes up to 1440- gets to max at 2/3
Motor 3= at 1/3 starts at normal rate- only gets to 1870 at full
Motor 4= at 2/3 starts at normal rate- only gets to 1430 at full
Using a:
4 2
3 1
I'm a beginner so any help is appreciated
Thanks
I'm having a problem with my motors where they don't spin up at the same time and don't spin in sync either.
I'm have the RTF JJRC JJPRO P200 Quad and it has EMAX 20A Lighning ESCs and a EMAX Skyline 32 fc.
I flashed the ESCs and FC with the most recent firmware and calibrated the ESCs in Betaflight mutipe times. When I throttle up once I arm it the motors start at different times and then are out of sync.
Motor 1= at 1/12 throttle it goes up to 1260- gets to max at 5/6
Motor 2= at 1/12 throttle it goes up to 1440- gets to max at 2/3
Motor 3= at 1/3 starts at normal rate- only gets to 1870 at full
Motor 4= at 2/3 starts at normal rate- only gets to 1430 at full
Using a:
4 2
3 1
I'm a beginner so any help is appreciated
Thanks