My newest flying wing. the HotRod
Designed to be a test platform to allow easy swap of all electronics.
Motor mount, servos, ESC reciever all zip tied on.
-This thing is fast. Sorry, i don't have the AUW or radar on top speed.
I do have a watt meter on order and will post more data as I get it.
Flies stable and predictable at 1/3 throttle. Trims well and sustains level flight at 1/2 throttle.
Climbs out vertical as far as I want to go at full.
The most fun and rewarding maiden ever so far
Custom cut 1.9 EPP
34" span, 14" sweep
2200mah lipo- Gensace
30a ESC- Volcano/Proton Series (HobbyPartz)
Turnigy 3530c 1700kv motor
7x6 APC prop (HobbyKing)
Tunigy MG90S servos
OrangeRX 6ch DSM2 receiver
Designed to be a test platform to allow easy swap of all electronics.
Motor mount, servos, ESC reciever all zip tied on.
-This thing is fast. Sorry, i don't have the AUW or radar on top speed.
I do have a watt meter on order and will post more data as I get it.
Flies stable and predictable at 1/3 throttle. Trims well and sustains level flight at 1/2 throttle.
Climbs out vertical as far as I want to go at full.
The most fun and rewarding maiden ever so far
Custom cut 1.9 EPP
34" span, 14" sweep
2200mah lipo- Gensace
30a ESC- Volcano/Proton Series (HobbyPartz)
Turnigy 3530c 1700kv motor
7x6 APC prop (HobbyKing)
Tunigy MG90S servos
OrangeRX 6ch DSM2 receiver