Shadow74
Multi-rotor madman
Here are a few pics of my tri-copter, I started off with the basic format/idea created and generously shared by David Windestal at rcexplorer.se then made a few of my own changes as the build progressed. I am getting approx 11.5-12.5 min flights on a fairly old 2200 3s lipo.
(many many thanks to David, for all that he has done in the name of multi-rotor aircraft)
Hardware:
Flycam KK-blackboard
2830-09 (850KV) motors www.lazertoyz.com
20amp esc www.lazertoyz.com
APC 10x3.8 slow-flyer props
TX: Spectrum DX6i (DSMX)
RX: AR6115e (DSMX)
Tail servo: HiTech HS-65HB "mighty feather" (karbonite gears/25-30oz torque)
Flight batteries: 2200mah/25C/3s lipo
Camera: GoPro HD Hero 2
(many many thanks to David, for all that he has done in the name of multi-rotor aircraft)
Hardware:
Flycam KK-blackboard
2830-09 (850KV) motors www.lazertoyz.com
20amp esc www.lazertoyz.com
APC 10x3.8 slow-flyer props
TX: Spectrum DX6i (DSMX)
RX: AR6115e (DSMX)
Tail servo: HiTech HS-65HB "mighty feather" (karbonite gears/25-30oz torque)
Flight batteries: 2200mah/25C/3s lipo
Camera: GoPro HD Hero 2
Last edited: