nano sized fpv transmitter

[eagle4]

Hey gang, just saw this on hobbyking (and some other places too). It's a nano sized video transmitter. it weighs only 3 grams!!! it also works directly with the fatshark gear right out of the box.

It can be used on a 1s up to a 4s battery too!!!

If you're into indoor flying or just want to fly your tiny plane fpv i think this is the ticket. especially if you paired it with one of those 1g cameras out there.


http://www.hobbyking.com/hobbyking/...Nano_FPV_Transmitter_FatShark_Compatible.html

Anyway just thought I'd share

 

[lvzx14]

I use this on a small brushed micro h build I did for indoor fpv. Works great and easy to wire with the filtered cam power out. Once they release the 150mw version that's the same size they will definitely have a winner.

 

[WindFreak]

Have you seen the $14 200mw one from RangeVideo? Peter did a DIY FPV video with it and the FT guys seemed to like it. I'm thinking of tinkering one up with a DIY cloverleaf.

 

[eagle4]

that one from rangevideo isnt right on the fatshark frequencies, which means you lose a ton of range. also it can only handle 3.3v maximum. where as the nano one i linked to can take 1s to 4s batteries, and has power out, so you can just connect your camera directly to it leading to a super clean setup. also no soldering required.

 

[WindFreak]

Ah, good points. Hassle-factor is huge.