Hey. I'm building my first quad (FT 210 frame) and plugged in my naze and it works fine. I noticed that when I plugged in my Lipo the board gets to around 125 degrees in about 7 seconds before I unplug it afraid that I'm going to fry the board. I have checked that all solder joints are correct/not touching. The battery voltage wires are correctly attached and read fine in beta flight. I have clipped the positive wires coming from my esc's except for one, it still gets rather warm but continues to function in beta flight. When plugged into just the USB port the board sits at around 80 degrees. That leads me to my question, what are your naze temps when your battery is plugged in and what could possibly be wrong?
Naze32 Temps are warm when plugged in
Similar threads
