I purchased a 400 mw 5.8ghz transmitter and receiver from China (I know my first mistake) and have been having a difficult time getting everything working. I have tested the camera by directly connecting it to a tv and it does work. I have tried every channel configuration possible and I never get sound or Audio. I called the manufacturer and they sent me another tx and rx free of charge and again I have the same problem. I have confirmed with a multimeter that everything is getting the proper voltage but again I get nothing on the display. Occasionally while switching channels I will get a brief 1/2 second of audio static but that is it. Is there anyway to confirm that the tx and rx are on the same freq?
Would anyone near Rhode Island be available to possibly help me in person if they are familar with FPV? Any suggestions would be greatly appreciated. I tried to upload photos to this post but for some reason I keep getting an upload error.
The system I have is available to be seen at http://www.soodohobby.com/New-5-8g-400mw-8CH-AV-FPV-Video-transmitter-Powerful_g.html
Would anyone near Rhode Island be available to possibly help me in person if they are familar with FPV? Any suggestions would be greatly appreciated. I tried to upload photos to this post but for some reason I keep getting an upload error.
The system I have is available to be seen at http://www.soodohobby.com/New-5-8g-400mw-8CH-AV-FPV-Video-transmitter-Powerful_g.html