steamshovel
Junior Member
Hi Everyone, we are new at the R.C. thing. After watching Flite Test videos with Josh and Josh, we decided to attempt the Fowl Flier (scratch build). We built the plane while waiting on our electronics to come. So far no problems, however once we recieved our electronics we quickly realized we had forgotten our speed controller. We are also at a loss as to how this stuff all wires together. I guess we assumed there would be a bus bar with push on tabs that labeled each component, but now all we have is a box of stuff with no schematic or wiring diagram. Can anyone please help? Here's what we have so far:
HXT900 9g / 1.6kg / .12sec Micro Servo 8
8X4R Propellers (Standard and Counter Rotating) (6pc)
NTM Prop Drive Series 28-26A 1200kv / 250w
Turnigy 1300mAh 4S 20C Lipo Pack
HobbyKing HK6S 2.4Ghz FHSS 6Ch Tx & Rx (Mode 1)
Turnigy balancer & Charger 2S-3S
Metal Push Rods M2.2xL300 (10pcs/set)
HXT900 9g / 1.6kg / .12sec Micro Servo 8
8X4R Propellers (Standard and Counter Rotating) (6pc)
NTM Prop Drive Series 28-26A 1200kv / 250w
Turnigy 1300mAh 4S 20C Lipo Pack
HobbyKing HK6S 2.4Ghz FHSS 6Ch Tx & Rx (Mode 1)
Turnigy balancer & Charger 2S-3S
Metal Push Rods M2.2xL300 (10pcs/set)