Mostly finished with my FT Baby Blender. Put a 1400kv Turnigy motor, a 20A Hobbyking Blue ESC and 1500mah 3cell Lipo. I also put an Orange RX3s 3-axis flight stabilizer on it. I haven't used it before so I am anxious to find out how well it works.
One problem I've found already is that when you use the bottom of the rudder as a tail skid, it makes it wiggle like a happy puppy. Cute on dogs- not as much on a biplane. So I built a tail skid from two popsicle sticks.
I also ran a fifth rubber band around the landing gear from forward wing support only. I have had problems in the past with some harder-than-ideal landings making gear like this fold up underneath.
One problem I've found already is that when you use the bottom of the rudder as a tail skid, it makes it wiggle like a happy puppy. Cute on dogs- not as much on a biplane. So I built a tail skid from two popsicle sticks.
I also ran a fifth rubber band around the landing gear from forward wing support only. I have had problems in the past with some harder-than-ideal landings making gear like this fold up underneath.