WHY SO MANY DIFFERENT CONNECTORS!!!!
1.0 1.25 1.5 2.0 2.54 and any of them can be wired diffently!
Thank you Hondo for the photo illustrating the different connector sizes. It will definitely save me from pulling more of my hair out trying to get my receiver connected.
When my FT Adventure arrived I was planning on using an AR620 receiver, as I already have several. But after seeing the small space I had to work with, I decided to order an AR6335, which would be much easier to fit, plus the added bonus of AS3X.
When the AR6335 arrived, I discovered that the servo plugs are smaller than the sockets on the receiver! This is my first micro, and all these different Barbie size connectors are a source of frustration to say the least. To add to the frustration, in the manual it says they have adapters available specifically for AR63** receivers, just order part FLT-8023. Go to the FliteTest store and search for that part number, it doesn't exist. In fact, try searching for all the spare part numbers listed on the back of the manual... none of them exist yet.
Fortunately, I have excellent soldering skills, I just don't have a stock of connectors like you do. So, I'm going to order some connectors from amazon and make my own adapters.
I'm confident that someday soon I'll be able to get my Adventure into the air.