insightman
New member
hello everyone, and forgive me for my bad english!
about a year ago i started learning about rc planes and quadcopters etc. i built a quadcopter with the AirGear350 set and a APM flight controller. i bought a 6 channel transmitter and receiver. so i managed to make it fly after a really long series of annoying problems. that was a success, a year goes by, and now i'm interested in fixed wing aircrafts.
i have no experience with rc planes. so right now i want to try and build a really simple plane and just learn to fly. i want it to fly slow and smooth so that it makes the training process easier. i know that i need a low kv motor and a few servos, battery, rc tx and rx, etc...
so this is where i need your help, hear me out:
i have my old quadcopter and i'm taking it apart, i can't buy a new motor and prop for now. so i was wondering if i could use one of the motors (tmotor 2213 with 95*45 props) and use it to build a simple trainer plane! i have a 2200 3s lipo, i can buy a few micro servos.
i'm getting really confused and i can't really determine if the motors i have are possible to be used in my "LEARNING HOW TO FLY An RC PLANE" Project.
i can replace the 95*45 prop with a smaller one if it solves the problem!
about a year ago i started learning about rc planes and quadcopters etc. i built a quadcopter with the AirGear350 set and a APM flight controller. i bought a 6 channel transmitter and receiver. so i managed to make it fly after a really long series of annoying problems. that was a success, a year goes by, and now i'm interested in fixed wing aircrafts.
i have no experience with rc planes. so right now i want to try and build a really simple plane and just learn to fly. i want it to fly slow and smooth so that it makes the training process easier. i know that i need a low kv motor and a few servos, battery, rc tx and rx, etc...
so this is where i need your help, hear me out:
i have my old quadcopter and i'm taking it apart, i can't buy a new motor and prop for now. so i was wondering if i could use one of the motors (tmotor 2213 with 95*45 props) and use it to build a simple trainer plane! i have a 2200 3s lipo, i can buy a few micro servos.
i'm getting really confused and i can't really determine if the motors i have are possible to be used in my "LEARNING HOW TO FLY An RC PLANE" Project.
i can replace the 95*45 prop with a smaller one if it solves the problem!