nnChipmunk v2

nerdnic

nerdnic.com
Mentor

RELEASE


CHASE


BUILD VIDEO

nnChipmunk v2 Plans
Purchase Build Kit

DETAILS

Hi friends.

I am really excited to release the nnChipmunk v2 to all of you! The original nnChipmunk was my favorite plane to fly, hands down. This is a sentiment that many of you have shared with me as well over email, here on the boards, and in person. To me, it was the triumphant design that stood tall above the rest. Every time I took it to the field someone would be amazed to learn that it was made from simple dollar foam. The nnChipmunk v1 bridged the gap between "oh that's a scratch build? Yeah.. I could tell" and "Wait, you made that? That plane is cooler than my store bought!" Even though it's not my most flashy, popular, or best looking design, it is still my favorite.

With that said I am happy to announce that starting in July 2016 the nnChipmunk v2 will be available for purchase in kit form!

New features in v2:

HATCH
-Updated version of nnP-39 style hatch

v3 SPEEDWING
-New custom airfoil that's SLICK (no FT style 'steps')
-More streamlined version of a clark y airfoil
-All planes I release with the v3 speedwing will have the same airfoil
-Easier to build

NEW BASIC WING
-Same airfoil as v3 speedwing
-Thinner profile
-Basswood spar
-Can handle 500w of power vs 350w on normal FT style basic wing

TAIL FEATHERS
-Double layer foam
-Added airfoil

CANOPY
-Added canadian canopy (featured)
-New 'framing' technique

GENERAL
-Wing notches to fuse cleanly
-Fuse length slightly reduced to allow for kit creation
-FT power pod and new nerdnic pod compatible

If you like this design then perhaps you’ll like some of my others as well.



SPECS

WINGSPAN
43in | 1100mm
FUSE
30in | 762mm
CHANNELS
4
WEIGHT
Airframe - 305g
ELECTRONICS
Basic - Power Pack C
MOTOR - Turnigy D3530/14 1100kv
PROP - 9x6 APC
ESC - Dynam 30a
BATTERY - 2200mah 3S
SERVOS - 4x 9g

Speed
MOTOR - Tacon Big Foot 10 1100kv 1100w or NTM 3548 1100kv
PROP - 10x10 APC
ESC - 80a Dynam
SERVOS - 4x 12g metal gear
BATTERY
120 MPH - Heavy Duty 3300 4S
85 MPH - Zippy 2200 3s 40c
BUILD DIFFICULTY
Beginner – You’ve never flown a plane before, let alone done a scratch build
Novice – You’ve flown a plane but have no experience with scratch building
Intermediate – You’ve flown and built a few FT style planes before
Advanced – You’ve mastered the standard FT build style and are looking for a new challenge
Expert – You’ve mastered all build techniques and aren't afraid to improvise or tackle tedious builds

This is a intermediate to advanced build.
PILOT SKILL
Intermediate
MATERIALS
6 BBQ skewer
3 sheets DTFB
1 flat aluminum 1/16" x 1/2" x 24" (speedwing)
1 Basswood 1/8" x 3 x 24" (basic wing)
1 sheet poster board
1 2 liter bottle
Push rods
Control horns
Hot glue


FAQ

Is the v2 a swappable?
It will accept a FT power pod as well as a new pod I have designed. The new pod is larger to accommodate a bigger battery.

Is this a good plane for a beginner to fly?
No. The nnChipmunk v2 is a bit too advanced for a beginner.

Can I build the basic wing without the basswood spar?
I would not suggest this. The basic wing is much more advanced than a standard FT style fold over wing. Some of these improvements create weak areas that need to be reinforced.

Can I build the speedwing with no aluminum?
No.

How come no flaps?
After testing the plane thoroughly I am confident it simply doesn't need them.

There is a plane I want you to design, what’s the best way to suggest it to you?
Please use the request form here on my site.


PICTURES

dSrXrudl.jpg


q5yrjFtl.jpg


AuQdvbxl.jpg


RMeLBXml.jpg


x8vQXwSl.jpg


QEjXrgsl.jpg


qbNkTe7l.jpg


5ybUc5nl.jpg


0ZW5Tk1l.jpg


DPqYYkyl.jpg


pqOg4aAl.jpg


kceZSsCl.jpg


chJozBhl.jpg



Thanks for checking out the nnChipmunk v2! If you built a v2 and enjoyed it please consider donating a few bucks so I can buy more supplies to make more great planes.


 
Last edited:

nerdnic

nerdnic.com
Mentor
Clear canopy and a scale cockpit, very nice. What other changes can we look forward to with v2?

HATCH
-Updated version of nnP-39 style hatch

v3 SPEEDWING
-New custom airfoil that's SLICK (no FT style 'steps')
-More streamlined version of a clark y airfoil
-All planes I release with the v3 speedwing will have the same airfoil
-Easier to build

NEW BASIC WING
-Same airfoil as v3 speedwing
-Thinner profile
-Basswood spar
-Can handle 500w of power vs 350w on normal FT style basic wing

TAIL FEATHERS
-Double layer foam
-Added airfoil

CANOPY
-Added canadian canopy (featured)
-New 'framing' technique

GENERAL
-Wing notches to fuse cleanly
-Fuse length slightly reduced to allow for kit creation
-FT power pod and new nerdnic pod compatible

Nic,

She looks awesome. When will the V2 plans go final?
This week :)
 

Jugsy

New member
This is definitely climbing up my list. I should just bite the bullet and grab a 50 pack of FT foamboard.
 

nerdnic

nerdnic.com
Mentor
Video is uploading now! It's 40gb though so assuming no network hiccups it will take most of the day to finish.