Hi all,
I'm new to this site so please let me know if this isn't the place for questions such as these.
Long story short, here are the questions:
1) Can an A2212-6 2200KV motor (with the provided ESC and prop) connected to a 5000mAh 3S 30C LiPo be used to power a DIY foam plane weighing 1.3kg? (weight is including the battery).
2) If not, then what about connecting two of those motors and ESCs in parallel to the same battery mentioned above?
3) What is the estimated flight time that I'm looking at? (In any of these scenarios).
Thanks for the help!
- Almost.
I'm new to this site so please let me know if this isn't the place for questions such as these.
Long story short, here are the questions:
1) Can an A2212-6 2200KV motor (with the provided ESC and prop) connected to a 5000mAh 3S 30C LiPo be used to power a DIY foam plane weighing 1.3kg? (weight is including the battery).
2) If not, then what about connecting two of those motors and ESCs in parallel to the same battery mentioned above?
3) What is the estimated flight time that I'm looking at? (In any of these scenarios).
Thanks for the help!
- Almost.