buzzbomb
I know nothing!
Firstly, props to the developers who are making it happen and the Family members who recommended it to me. I've read enough to realize I can do just about anything RC, with the trans and software. I can build whatever I want.
I could build a TinyTrainer, give it a V-Tail and program everything so that I've got a little bit of this and and a little bit of that and make it fly as something it was never intended to be. I've got a trans with a whole lot of channels and switches just waiting for me to program them. I can literally make any switch or input or output do anything I want. That's pretty darn strong. It's also, and I kid you not, a STEEP learning curve.
I knew that before I bought it. I was warned and also encouraged. My whole flying style is getting out there and getting stupid. It's stress relief. A few years down the road? My Gosh, if you haven't read into OpenTX, you have no frackin' idea of the possibilities.
That being said. It IS a steep learning curve. My question? I'm short of motors and I want put my TT into the air as 4-channel with the F motor. Assuming I can get her to balance with my 3s battery, I don't want to crash because I can't control the speed. I'm all about crashing foamboard planes, ya'll know that, but I want to fly! Holy Shoot! She'll be be absolutely glorious!
I've never successfully flown 4ch and I want to maximize my chances of success. I would like to limit the maximum thrust that I can give to the F motor. I remember there is a screen where you set min and max limits, but I don't understand how it actually works.
If anyone can offer up some insight, I would be much appreciated. Otherwise? My usual 100% all the way, baby!
I could build a TinyTrainer, give it a V-Tail and program everything so that I've got a little bit of this and and a little bit of that and make it fly as something it was never intended to be. I've got a trans with a whole lot of channels and switches just waiting for me to program them. I can literally make any switch or input or output do anything I want. That's pretty darn strong. It's also, and I kid you not, a STEEP learning curve.
I knew that before I bought it. I was warned and also encouraged. My whole flying style is getting out there and getting stupid. It's stress relief. A few years down the road? My Gosh, if you haven't read into OpenTX, you have no frackin' idea of the possibilities.
That being said. It IS a steep learning curve. My question? I'm short of motors and I want put my TT into the air as 4-channel with the F motor. Assuming I can get her to balance with my 3s battery, I don't want to crash because I can't control the speed. I'm all about crashing foamboard planes, ya'll know that, but I want to fly! Holy Shoot! She'll be be absolutely glorious!
I've never successfully flown 4ch and I want to maximize my chances of success. I would like to limit the maximum thrust that I can give to the F motor. I remember there is a screen where you set min and max limits, but I don't understand how it actually works.
If anyone can offer up some insight, I would be much appreciated. Otherwise? My usual 100% all the way, baby!
Last edited: