sumone
Active member
I Have been making some changes and repairs to my ORX TX6i
* Added an enter button so as to take the strain off the hex pin on the scroll wheel.
* 3D printed new scroll wheel and araldite a new hex pin in the scroll wheel.
Next i wanted to do a battery mod. ( 3D print a new battery cover with recessed box to house 2s li-ion battery ).
I assume it takes the Eqivelant of a 2S (when i use stock 4X AA's it requires i get a voltage on the lcd display of 6. something volts.
Would i be right in thinking if i connect my homemade 18650 2s li-ion packs to the existing battery terminals via balance plug i shouldn't need to do anything else ?.
* Added an enter button so as to take the strain off the hex pin on the scroll wheel.
* 3D printed new scroll wheel and araldite a new hex pin in the scroll wheel.
Next i wanted to do a battery mod. ( 3D print a new battery cover with recessed box to house 2s li-ion battery ).
I assume it takes the Eqivelant of a 2S (when i use stock 4X AA's it requires i get a voltage on the lcd display of 6. something volts.
Would i be right in thinking if i connect my homemade 18650 2s li-ion packs to the existing battery terminals via balance plug i shouldn't need to do anything else ?.
