Anyone else building the P38 from downloaded plans and had the same problem I have found?
Having positioned the two fuselage booms on the wing at the measurements given in the build video, the ends of the booms are nowhere near the correct spacing for the horizontal stabilizer fitment. They seem to be about an inch too close together, which is strange as everything else so far has gone together and fitted really well. If I slide the booms out to give the correct spacing, the cut-outs for the wing are then too big.
Thanks for any advice.
Having positioned the two fuselage booms on the wing at the measurements given in the build video, the ends of the booms are nowhere near the correct spacing for the horizontal stabilizer fitment. They seem to be about an inch too close together, which is strange as everything else so far has gone together and fitted really well. If I slide the booms out to give the correct spacing, the cut-outs for the wing are then too big.
Thanks for any advice.