Polaris, FT mini style

jpot1

Elite member
@Paracodespoder glad you built one. Hope it flys well for you. CG is 210mm back from where the wing hits the fuse.

F526BFB2-3E1C-40CD-B73E-0C85C36DA719.jpeg
 

Paracodespoder

Elite member
Thank you, I went out in the snow with an estimated cg, and it flew really well. However, there was a very strong wind and long story short I now have a crumpled nose and reinforced section where the wing meets the fuse 🙄.
 

tomlogan1

Well-known member
With the motor in the back the esc must be far back as well. How did you get the 3 wires from the motor to the ESC?

Thanks.
 

jpot1

Elite member
Yes the nacelle and vstab has a channel and I ran extended wires all the way up front to the hatch area. I’m able to swap the esc in and out that way. Post some pics of your build!