epic.engineering
Senior Member
I was just outside running the timer on my remote to get the flight times of the batteries that I have.. I had the idea if we post setups and flight time that may make it easier for others to better pick components to suit their needs.
My setup
Frame:Wooden bat bone tri copter
Motors: turnigy D2822/14 1450kv
ESC: HK blue series 20amp programmable
Props: slow fly 8.45
Flight controller: HK multi rotor control board V3.0
Accessories: 45 L.E.D'S. ( 15on each boom for orientation and night flying)
Batteries tested:
Turnigy nano tech 2200mah 3s 25-50c discharge rate... flight time 9:30 before esc cut off.. 8 minutes is a safe flight time to return and land..
Eflite 1500mah 3s 30amp max discharge rate flight time 6:20... safe flight 5 minutes, gives you time to return and land.
I hope to have a 3000mah nano tech soon.. so I'll up date when I get that battery.. I (ESTIMATE) 10-11 minutes of safe flight time
My setup
Frame:Wooden bat bone tri copter
Motors: turnigy D2822/14 1450kv
ESC: HK blue series 20amp programmable
Props: slow fly 8.45
Flight controller: HK multi rotor control board V3.0
Accessories: 45 L.E.D'S. ( 15on each boom for orientation and night flying)
Batteries tested:
Turnigy nano tech 2200mah 3s 25-50c discharge rate... flight time 9:30 before esc cut off.. 8 minutes is a safe flight time to return and land..
Eflite 1500mah 3s 30amp max discharge rate flight time 6:20... safe flight 5 minutes, gives you time to return and land.
I hope to have a 3000mah nano tech soon.. so I'll up date when I get that battery.. I (ESTIMATE) 10-11 minutes of safe flight time