Hi guys,
I feel that I have missed something simple in my baby blender scratch build but here goes;
When installing the power pod into the baby blender there are 4 notches that mate both pod and plane together. In the video the alignment plate is then glued to the underside of the baby blender fuselage. My query now is how do the 2 forward notches/tabs locate together with the thickness of the alignment plate now preventing this from occuring.
My guess is that the 2 forward notch/tabs don't locate together only the rear two and this setup provides a required down thrust for the baby blender.
Its odd that the notches are cut into the fuselage but not used. Check the build video for the baby blender at 10 mins.
Anyone else experience this? Other than this the build was great so far. Can wait to fly it
Cheers macajdm
I feel that I have missed something simple in my baby blender scratch build but here goes;
When installing the power pod into the baby blender there are 4 notches that mate both pod and plane together. In the video the alignment plate is then glued to the underside of the baby blender fuselage. My query now is how do the 2 forward notches/tabs locate together with the thickness of the alignment plate now preventing this from occuring.
My guess is that the 2 forward notch/tabs don't locate together only the rear two and this setup provides a required down thrust for the baby blender.
Its odd that the notches are cut into the fuselage but not used. Check the build video for the baby blender at 10 mins.
Anyone else experience this? Other than this the build was great so far. Can wait to fly it
Cheers macajdm