Power System Help

[smaru]

Hi, I needed some help putting together a power system that for a slow stick plane.

Here's the link to some stuff I picked out http://www.hobbyking.com/hobbyking/...=sidddharthamaru@gmail.com&idCustomer=1486212
Please check it out and do let me know if its good or if there are better options out there.

I wanted something that i can use in future too for different builds.

Thanks,
Sid

 

[con244]

Hi Sid, there doesn't appear to be anything on that wishlist
Con

 

[smaru]

Sorry about that, not sure how that happened.

Motor - Turnigy Park450 Brushless Outrunner 890kv
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=14397

ESC - Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=17135

Battery - Turnigy nano-tech 1300mah 3S 25~50C Lipo Pack
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=11903

Prop - APC Style Propeller 9x6 (2 pc)
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=22427

 

[con244]

Hi Sid, that set up looks ok. You could go for a larger prop, say a 1047 slow flyer. The smaller prop will spin faster drawing more current. Remember the slow stick is a slow flyer so don't expect it to fly real fast. I ran a brushed setup with a 300 sized motor then upgraded to a 900Kv brushless motor with 3s lipos on mine with no issues but the hard ground. I loved my slow stick, in fact I'm thinking about getting one of the new Hobbyking versions soon.
Con