Printing a Camera Slider

[Andrea]

Hi to everyone, I am Andrea from Italy an I'm an addicted to 3d Printing.
My ongoing project is a camera slider.
I'm also recording all the printing process on youtube and learning some video editing stuff.
First Print - Frame

 

[Andrea]

I've made the next part for the slider, it's a piece that carry the electronic components

 

[IcedStorm777]

What printer do you use?

 

[Andrea]

I've an Anycubic Kossel

 

[Andrea]

I've printed the part that hold the motor to the frame

 

[Andrea]

I've got some problem during the rendring process of the timelapse, but I went on with my work, I've made the fourth part of the camera slider, hope you like it.
Bye!

 

[Andrea]

The build is almost ended.
I've put together the slider, one thing is missing and it's the belt for the motor.
Next and last step will be programming the arduino and if it works good or bad =)

Also i0ve made a video by moving the slider by hands:

 

[Andrea]

The camera slider is ready, this are my results for now, I'm gonna tweak something in the future, but for now the project is done and it works.
Video here: