wtpalexander
Junior Member
Hi guys,
I have just finished building my ft cruiser and having installed all the electronics, I have no power to my motors. When power reaches the two ESC there are no bleeps evan though power is making it to the receivers and servos as I have complete control over them with my Spektrum DX5e. Heres the info;
Controller; Specktrum DX5e
ESC; 2x Turnigy Plush 25a (from hobby king)
Motor; NTM prop drive 28-30 750kv
Battery; Turnigy 2.2 3S
The ESC are hooked up to y-harnesses for the power and signal wires. I have not pulled out the red wire in one as Josh B didn't do it in the build video.
Here are some photos;(linked to dropbox)
https://www.dropbox.com/s/e3wdrjlfal0jcvo/IMG_3357.JPG - Motor setup
https://www.dropbox.com/s/q41qty09ssp4zq5/IMG_3356.JPG - One of the ESC (they are both the same)
https://www.dropbox.com/s/9xcu0vk8so7tvdj/IMG_3355.JPG - Whole plane with working servos
https://www.dropbox.com/s/wi32sbf342um4za/IMG_3354.JPG - Receiver
https://www.dropbox.com/s/0h3tju0kgi29igb/IMG_3350.JPG - Current set-up
I've tried just using one attached to the receiver and still nothing.
Thanks in advance, Will
I have just finished building my ft cruiser and having installed all the electronics, I have no power to my motors. When power reaches the two ESC there are no bleeps evan though power is making it to the receivers and servos as I have complete control over them with my Spektrum DX5e. Heres the info;
Controller; Specktrum DX5e
ESC; 2x Turnigy Plush 25a (from hobby king)
Motor; NTM prop drive 28-30 750kv
Battery; Turnigy 2.2 3S
The ESC are hooked up to y-harnesses for the power and signal wires. I have not pulled out the red wire in one as Josh B didn't do it in the build video.
Here are some photos;(linked to dropbox)
https://www.dropbox.com/s/e3wdrjlfal0jcvo/IMG_3357.JPG - Motor setup
https://www.dropbox.com/s/q41qty09ssp4zq5/IMG_3356.JPG - One of the ESC (they are both the same)
https://www.dropbox.com/s/9xcu0vk8so7tvdj/IMG_3355.JPG - Whole plane with working servos
https://www.dropbox.com/s/wi32sbf342um4za/IMG_3354.JPG - Receiver
https://www.dropbox.com/s/0h3tju0kgi29igb/IMG_3350.JPG - Current set-up
I've tried just using one attached to the receiver and still nothing.
Thanks in advance, Will