Problems with Wizard x220

[tval]

Would this work for the Wizard? Mine says BEC 5V/3A & 12V/3A while this one on amazon says BEC 5V/3A & 12V/2A, would it still work?
https://www.amazon.com/Hobbypower-Power-Distribution-QAV210-QAV250/dp/B01C8M7GMW/ref=sr_1_28?crid=1I4MLQ864WYCQ&keywords=matek+power+distribution+board&qid=1562886269&s=gateway&sprefix=matek,aps,126&sr=8-28

It also doesnt look the same as my board...

 

[ElectriSean]

Should work well.

 

[FDS]

If your board is the Matek one then they are not too hard to get. Take some pictures, maybe someone can ID the board you have.

 

[tval]

Should work well.

Are you sure? Because I have it in my amazon cart next to the lightbulb and wires

 

[ElectriSean]

Are you sure? Because I have it in my amazon cart next to the lightbulb and wires

It has everything you need, and the layout is pretty similar. One thing that may be annoying is the LED's on the arms, I'd recommend not connecting them - they break easily and they make a mess of the wiring.

 

[tval]

Ok, just bought everything. If i have problems with wiring ill be sure to come back and ask questions.