Hi all,
I've searched everywhere for an answer but cant seem to find it, i was hoping someone on here could help me.
So my quad setup is:
SpRacing F3 Acro 6 DOF
Racerstar MS Series 35A ESC BLHeLi_S
Racerstar 2205 2300kv motors
on a martian III frame.
Whenever i do hard maneuvers in any axis the quad either whines and locks up for a second, Or it just goes spazz mode and flips out hard.
I have tried doing different gyro/PID loop rates, turning various PID settings low/high, and messing with the stick rates. As far as i can tell, it calms down a bit when i decrease the rates for my stick movement. But that doesnt really solve the problem because now im just turning very sluggish and flying quality starts to suffer.
Maybe a bad gyro or something?
The strange thing is, that i have a very similar build on a martian II frame with same motors and the same SpRacing F3 FC.... One difference is the ESCs though. On my other quad (the one without the problems) it has makerfire 20A ESCs.
So my best guess is that maybe i have something wrong on my ESC settings? I have tried both oneshots, multishot, and dshot. nothing seems to fix it.
If someone can help me solve this I would REEEEAAAAALLY Appreciate it! THANKS!
I've searched everywhere for an answer but cant seem to find it, i was hoping someone on here could help me.
So my quad setup is:
SpRacing F3 Acro 6 DOF
Racerstar MS Series 35A ESC BLHeLi_S
Racerstar 2205 2300kv motors
on a martian III frame.
Whenever i do hard maneuvers in any axis the quad either whines and locks up for a second, Or it just goes spazz mode and flips out hard.
I have tried doing different gyro/PID loop rates, turning various PID settings low/high, and messing with the stick rates. As far as i can tell, it calms down a bit when i decrease the rates for my stick movement. But that doesnt really solve the problem because now im just turning very sluggish and flying quality starts to suffer.
Maybe a bad gyro or something?
The strange thing is, that i have a very similar build on a martian II frame with same motors and the same SpRacing F3 FC.... One difference is the ESCs though. On my other quad (the one without the problems) it has makerfire 20A ESCs.
So my best guess is that maybe i have something wrong on my ESC settings? I have tried both oneshots, multishot, and dshot. nothing seems to fix it.
If someone can help me solve this I would REEEEAAAAALLY Appreciate it! THANKS!
Last edited: