Quadcopter retrofit weird problem, cant explain. - FIXED solution and video posted.
I dont know how else to explain the problem other than to show you all.
I got these flashed ESCs on ebay and loaded them up with the new motors. I couldnt use the old ones because they are 20a escs. Anyway, after trying a different frame I went back to the 450. However, the flight was erratic and insane. It occurred to be to calibrate the ESCs. After, following the instructions to the letter I got the success beep on the ESCs. I then attempted to test the motors. I have tried the following to remedy the problem with no success.
-calibrating the ESCs again.
-calibrating the radio.
-re-flashing the crius board.
-calibrating the radio.
-calibrating the ESCs again...
Please help...
I dont know how else to explain the problem other than to show you all.
I got these flashed ESCs on ebay and loaded them up with the new motors. I couldnt use the old ones because they are 20a escs. Anyway, after trying a different frame I went back to the 450. However, the flight was erratic and insane. It occurred to be to calibrate the ESCs. After, following the instructions to the letter I got the success beep on the ESCs. I then attempted to test the motors. I have tried the following to remedy the problem with no success.
-calibrating the ESCs again.
-calibrating the radio.
-re-flashing the crius board.
-calibrating the radio.
-calibrating the ESCs again...
Please help...
Last edited: