Recommended motor for a 70cm 3D printed FT Flyer

[kamil_blue]

Hii,

I'm building a 3D airplane inspired from the FT Flyer.
I'm doing this because i like to midel and create an airplane, so I'm taking the FTFlyer as my base design.

My intention is for it to be a trainer/slow flying airplane, which i can allow my kid to fly.

My question is, how can I determin which motor i should get?

The design final wieght would be aroung 600gr.
I want to connect it to a 3S battary.
I'm interested to use as much short propeller as i can, so i won't have to use a long landing gear, i might get a foldable propeller.

Thank you for your help.

 

[Grifflyer]

The FT A pack motor would be great for that application. The A pack motor swings a 5 or 6 inch prop

 

[kamil_blue]

Doesn't help, it's too weak:
Recommended Model Weight: 100-400g

 

[Flyingshark]

What about a B-pack on 2s or 3s? That would probably work.

By the way, 600g is pretty heavy for a mighty-mini sized plane. The Flyer does have a lot of wing area, though so you might be ok. It will definitely fly faster than a standard foam Ft flyer.

EDIT:
The B-pack comes with a 9x4.5 prop.