RMRC Goblin Replica v1.0

sirjaymz

Member
Moved here from FT-Goblin Thead
Sep 10, 2020
#30

So did we ever find out as Josh had stated that FT was going to Pre-Plan the RMRC Goblin, and then kit one of them. (We obviously know FT went with Andrew's design, most likely because FT owns the design where as the RMRC, probably not so much)
Did the RMRC Pre-Plans get released by chance, or has anyone put the RMRC Goblin version into DoubleCAD_Xt yet?.

Attached is the one I'm looking for.
323760_e1eb339c47f05ceb90c0ada60131bc02.jpg
 
Last edited:

sirjaymz

Member
Moved here from FT-Goblin Thead
Friday at 8:47 AM
#35


CarolineTyler said:

Sorry, they never released those plans.
I just came a cross another RMRC dtfb Goblin in the wild, that's been out there for a couple of years.. my googling-power were not so sharp previously.. not sure why i missed this one, but he created a good replica of the RMRC foam board version. I've asked if he would be able to post plans..
 

sirjaymz

Member
Moved here from FT-Goblin Thead
All credit to TheWizard from YT. He provided. I thought to share with community.

RMRC Goblin Plan ~replica

EDIT : built in a couple of hours. Couple of things to mod.. the fuselage to wing is 1 foam thickness not cut out enough on the fuselage. simple fix, but you'll have to remove some material to get it to sit tight against the wing. 2nd thing, the tabs on the back that engage don't line up exactly right, so I just trimmed the tabs a smidge. came together as I hoped. there's no marking for servo's, so you might want to cut out a location, or plan where you want them installed.
 

Attachments

  • RMRC Goblin Plan.zip
    1.2 MB · Views: 0
  • 340436_32ec7f575fb651a3cf2369e8b1bade81.jpg
    340436_32ec7f575fb651a3cf2369e8b1bade81.jpg
    2.5 MB · Views: 0