S-Tee 250 by WillyNillies.com soon to be released

Willy Nillies

Elite member
Hi Everyone,

S-TEE 250 soon to be released. 6.25oz ready to fly! Let us put this one that was built from a production kit through the a couple more stress tests and we should be ready to release. It's a really fun little RET airplane. :)

S-Tee 250 Specs:
Wingspan: 28"
Wing Chord 5"
Wing Area: 140 sq in
Fuselage length from front of fuselage to tip of rudder: 19.5"
Flying Weight Brushless or Glow: 6 to 6.5 ounces.
Wing loading 6.69 oz/sq.ft.
Wing Cube loading : 6.8
Features:
Build as 1,2 or, 3 channel
Easy access battery hatch - secondary bottom hatch also!
Built in servo tray in fuselage (includes 3rd servo cutout for PeeWee .020 RC users)
Clark Y flat bottom airfoil
Laser cut self jigging construction - The entire airframe can be built and ready to cover in less than 2 hours!
Full length shear web re-enforced main spar.

Includes:
All wood pieces to build the entire airframe
.032 K&S music wire pushrods
.052 K&S music wire for landing gear
Laser cut wheel retainers
Motor mounting screws, blind nuts and washers
Plastic motor mount to use on most 1306 brushless quad motors
6 each number 32 rubber bands for attaching wing

Recommended equipment:
2 or 3 each 3.7 to 5 gram servos - Rudder and Elevator or Rudder, Elevator and Throttle
Power: 1306 - 3100kv brushless motor or Cox Pee Wee .020 glow engine (Throttle sleeve recommended for the most fun!)
For Brushless - 350 to 500 mah 2s lipo battery
- minimum 8 amp ESC.
- Gemfan 5030 or 6030 or equivalent propeller
 

Attachments

  • 95959258_593644444614691_1444243600081682432_n.jpg
    95959258_593644444614691_1444243600081682432_n.jpg
    37.5 KB · Views: 0
  • 96462266_593644351281367_5004928018548785152_n.jpg
    96462266_593644351281367_5004928018548785152_n.jpg
    33.8 KB · Views: 0
  • 100867220_760916277778537_1503484410412924928_n.jpg
    100867220_760916277778537_1503484410412924928_n.jpg
    39.2 KB · Views: 0
  • 100875847_760916237778541_4230626319378939904_n.jpg
    100875847_760916237778541_4230626319378939904_n.jpg
    36.4 KB · Views: 0
  • 101092707_760916307778534_263695014696058880_n.jpg
    101092707_760916307778534_263695014696058880_n.jpg
    34.1 KB · Views: 0
  • 101256102_760916377778527_5988445602000666624_n.jpg
    101256102_760916377778527_5988445602000666624_n.jpg
    32.2 KB · Views: 0
  • 101398134_760841097786055_3275474473771335680_o.jpg
    101398134_760841097786055_3275474473771335680_o.jpg
    88.4 KB · Views: 0
  • 101901654_760916411111857_7394813895543619584_n.jpg
    101901654_760916411111857_7394813895543619584_n.jpg
    28.3 KB · Views: 0

CMS_1961

CMS_1961
That was my first RC Airplane back in 1980!! Airtronics --I believe had the kit back then. Should have flown great but I had no idea how to build back then (gobs of glue)!! Advice--keep it light and it will fly great!!