Scratch Builders beginner's kit?

[lysjones]

I've been looking for some advice/guidance on what all I need to stock up on in order to start building several of the scratch build ideas I'm seeing on the internet. I've got 4 different motors, 2 esc's, some batteries and a new radio on the way. but does anyone have a good list that I could take to HobbyKing or some similar site and just fill up my cart with all of the 'stuff' I need to get started? I'm thinking things like control horns, push rods, whatever wiring, etc.

This may have been asked before, but I'm still looking for a good concise list, if anyone knows of such a beast.

Thanks for any help!

lj

 

[pgerts]

Propellers and servos are always something to add when there are some grams left in the package.

Piano wire, carbon rods and tubes, glue and hard ply is something i get locally for the pushrods, control horns motor monts and small parts.

 

[urbansniper]

LJ,

I built my first rc plane about a month ago. it was a scratch build F22. below are the items i ordered, i had alot of help from my brother in law.

hobby king
1x #ACC6/7028 Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories = $22.99
1x #9052000014/20968 Hobbyking 60w Power Supply = $9.99
1x #AM2001-10x10/9707 10CM Servo Lead (Futaba) 32AWG Ultra Light (10pcs/set) = $1.99
1x #450-0024/14927 Simple Prop Balancer = $1.50
1x #CELLTKEY/19066 HobbyKing Cell Key - 6s Lipoly Cell checker = $2.99
2x #APC8x4-E/5437 APC style propeller 8x4-E = $2.00
1x #07-00502x10/8419 Control Horns 16x20mm (10pcs) = $0.97
1x #AM2001-20x10/9706 20CM Servo Lead (Futaba) 32AWG Ultra Light (10pcs/set) = $1.89

hobby partz
1 JST Lead/W female connector
1 heat-shrinkable tubing ø3---black
1 Gold connector ?2.0mm
3 GENS ECO 800mAh 11.1V 20C
1 JST-to-4.0mm banana plug Charge Harness 22awg 150mm
1 Brushless motor+18A ESC+3pcs 9g servos
1 2.4G 6-Channel Receiver (R6B) for CT6B 6-CH TX
1 FS-TH9X 2.4GHz 9CH Transmitter - RC Helicopters/ Airplanes Transmitter Receiver