Trueshot21
Member
Noticed after I already posted in the electric fixed wing aircraft that there was a tab for warbirds. So on that note felt it necessary to post a new thread here where is belongs. But here is where I'm at so far.
Wing span 49" length 46.5"
Testing a center line fuselage with rib construction and a light covering over to lighten the weight even more than just foam board. On the fence if I'm keeping retracts.
Horn pivot flap construction.
I did not pull anyone's plans for this I printed out spitfire cad drawings front/left/top on normal 8.5 11 sheets. Drew out in 1/2" squares and increased To templates 3 3/8" square on cardboard sheets all hand drawn. There are easier methods but I like to do every step and know my airplane and my mistakes are mine not a print fault this is my design in and out I like those failures and learning experiences.
If you see a fault or have a tip on what you see let me know I'm new to airplane building I only flew out of the box glows and seen my uncle work with balsa wood.
Ill keep posting my progress in case anyone is interested.
Wing span 49" length 46.5"
Testing a center line fuselage with rib construction and a light covering over to lighten the weight even more than just foam board. On the fence if I'm keeping retracts.
Horn pivot flap construction.
I did not pull anyone's plans for this I printed out spitfire cad drawings front/left/top on normal 8.5 11 sheets. Drew out in 1/2" squares and increased To templates 3 3/8" square on cardboard sheets all hand drawn. There are easier methods but I like to do every step and know my airplane and my mistakes are mine not a print fault this is my design in and out I like those failures and learning experiences.
If you see a fault or have a tip on what you see let me know I'm new to airplane building I only flew out of the box glows and seen my uncle work with balsa wood.
Ill keep posting my progress in case anyone is interested.
