TheCROZ007
Member
Hi! I need to get some more servo arms. I've got some FT 9g servos and was wondering which arms would fit on them. Are they standard sizes?
Servo arms?
- Thread starter TheCROZ007
- Start date
happyface838
New member
Sadly it is not as simple as suggesting an alternative servo arm without knowing more about the servo. It is unlikely that FT actually manufacture their own servos, more likely that they will be re-badged versions from another manufacturer.
The issue is not solely the diameter of the output shaft, but also the spline count, with this info, an alternative could be suggested.
A search for FT 9g servos has suggested that the model number is es08aii, which corresponds to the EMax 9g servo of the same identification but sadly no specific information for any potential alternative arms.
The issue is not solely the diameter of the output shaft, but also the spline count, with this info, an alternative could be suggested.
A search for FT 9g servos has suggested that the model number is es08aii, which corresponds to the EMax 9g servo of the same identification but sadly no specific information for any potential alternative arms.
Last edited:
whackflyer
Master member
The FT 9g servos are rebadged Emax ES08AII. I'm not sure if you can get replacement arms or not
