Servo connectors compatibility

[FrenchBaguette]

Hi,

I want to by some servo extension cables, but when looking on different sites I find that it seems they may have different connectors.
I am using a FlySky FS-i6x transmitter with x6b.
Does connectors labelled 'futaba' can fit with my receiver and servos ?
Cable: https://fr.banggood.com/10pcs-22AWG...entCountry=FR&cur_warehouse=CN&ID=52082949417
Servos: https://fr.banggood.com/4PCS-Racers...604.html?akmClientCountry=FR&cur_warehouse=CN

Regards

 

[leaded50]

Yes, you can use the "futuba" extensions. The differences you can see here. On some it can be small edges can be on both sides, or just one side (Traxxas eg.) but mainly you can use it anyway, as on the planned servos.
Ive used "futuba" extensions with Racestar servos my self.

 

[Merv]

....Does connectors labelled 'futaba' can fit with my receiver and servos ?.....

I agree with @leaded50, yes you can use them. You will need to cut away the tabs, but they will work.

 

[Piotrsko]

And if you cut away the tabs when you connect them make sure you keep the wires connected correctly since Futaba tends to wire stuff backwards to everyone else.

Actually you should sand them off since there isn't a lot of connector there

 

[leaded50]

its just plug and play, the connectors you listed from Bangood are without the tabs on the "he" contact, but have space for tabs on the "she" end only.

 

[FrenchBaguette]

Thanks all, I will go with the 'futaba' connectors