Slow Stick Jenny, Foam board format.

HappyRCFlyer

Active member
I'm sharing a new version of the Slow Stick Jenny and it's using laser cut foam board and light ply for the wing and tail feathers. It's super simple, easy to build and strong. Same dimensions as the original GWS Slowstick, just as the original Slow Stick Jenny was originally done. Around one pound flying weight, 38" wingspan. I just need to install the control horns and it's ready to fly.

Also, I do recommend watching some of the Flight Test build video's in general along how they handle the laying down on the hot glue. Understand though, they are using industrial hot glue guns with longer then standard stick lengths. This requires doing some things in smaller steps with that area for those of us using just cheap off the shelf hobbie versions.
 

Attachments

  • progress-1.jpg
    progress-1.jpg
    109.1 KB · Views: 0
  • progress-2.jpg
    progress-2.jpg
    116.9 KB · Views: 0
  • progress-3.jpg
    progress-3.jpg
    342 KB · Views: 0
  • progress-4.jpg
    progress-4.jpg
    460.6 KB · Views: 0
  • jenny-fb-1.jpg
    jenny-fb-1.jpg
    244.6 KB · Views: 0
Last edited: