I can't stop adding details to my Duster!!!
Thought I was finished, and every time I see another picture of Dusty, I see something he needs!
The circle around the 7s', is driving me nuts!
You sir have created what should be considered a static model....hang it from the ceiling and bring it out only on special occasions. Too nice to fly, of course I'm the sort of guy with some strange superstitions about painting a plane I enjoy flying.
Thank you, Cranialrectosis...My first scratch build.
I have a few pics of the build I thought I might post, if there was an interest.
There are quite a few mods to the plans, as you can see.
I think you should make his crop dusting sprayer attachment. Some long black bendy straws all piped together could work. Fill a little water baloon with water and orange food coloring and pipe it to the straw array. Pinch it shut with a clothes pin or some such device and put it in dusty internally. Rig it to a servo for spray on/spray off functionality. Engage in multiple low speed low passes with water on and post it to youtube for our enjoyment! Thank me very much!!!
I think you should make his crop dusting sprayer attachment. Some long black bendy straws all piped together could work. Fill a little water baloon with water and orange food coloring and pipe it to the straw array. Pinch it shut with a clothes pin or some such.device and put it in dusty internally. Rig it to a servo for spray on/spray off functionality. Engage in multiple low speed low passes with water on and post it to youtube for our enjoyment! Thank me very much!!!
Hi Tomcub,
Really nice biuld you got there. I also have a question. Where did you get the spinner? I"ve been looking for a small diameter 3 blade spinner for a Mozzie biuld I"m hoping to do this winter. The smallest I can find is a 2" from Du-Bro but yours looks like it may be smaller. If it is could you direct me to where I might get one? WJ.
I've had it for a couple of years, not for sure, but I think this is where I got it, Colored Carton Sealing Tape. It comes in 110 yard rolls, I believe I got the rainbow pack, all the basic colors. I used all the black making stripping a decals. The black on Dusty is black electrical tape under clear packing tape.
Hi Tomcub,
Really nice biuld you got there. I also have a question. Where did you get the spinner? I"ve been looking for a small diameter 3 blade spinner for a Mozzie biuld I"m hoping to do this winter. The smallest I can find is a 2" from Du-Bro but yours looks like it may be smaller. If it is could you direct me to where I might get one? WJ.
This one came off of a Flyzone FW 190, I tried to fly through a building. This was part of the replacement parts. The FW wound up being a fatality, sooooo, Dusty got it. Here's a link to the spinner, here's the prop
Tom
This one came off of a Flyzone FW 190, I tried to fly through a building. This was part of the replacement parts. The FW wound up being a fatality, sooooo, Dusty got it. Here's a link to the spinner, here's the prop
Tom
Thank you, and yes sir it did...almost as bad as take off when almost tipping a wing...that would have been a pretty cartwheel. Any landing where I don't break anything is a good one.