• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Spekrum dx6 bind fail

#1
I've recently purchased a dx6 and two AR610 receivers. My problem is the transmitter has been bound to both receivers but will not connect anymore. There are two model profiles but when I bind to one it tells me bind failed. Any suggestions?
My next idea would be to call spectrum for help. Thanks.
 
#2
i have had trouble getting spektrum's to bind if the radio and the receiver are to close together, try getting the rx into bind mode step about 10ft away then turn on the radio in bind mode.
 
#3
try more space

i have had trouble getting spektrum's to bind if the radio and the receiver are to close together, try getting the rx into bind mode step about 10ft away then turn on the radio in bind mode.
I agree I have had the same problem but moving the Transmitter a few feet from the plane fixes it.
dont know why but it works.