spitfire prop

[Trains1213_YT]

looking for good three blade prop for spitfire know any good ones.

 

[mrjdstewart]

and.....?????

you need a new one? don't know what size? looking for recommendations?

i personally fly with a 10x4.5 SF with a 30A esc and a 3S-1800 LiHV.

laters,

me

 

[Paracodespoder]

10x4.5 or 9x6 will work.

 

[buzzbomb]

hi broke prop on spit

Hi. I haven't met the forum member "broke prop on spit" but Hi to him or her as well!

If I misunderstood your post, then I will say don't spit at your propellor. I hear it breaks them. Just sayin' Welcome to the forum, Trains1213_YT!

 

[Trains1213_YT]

hello thinking bout getting a legacey is it any good for a trainer.

 

[DamoRC]

looking for good three blade prop for spitfire know any good ones.

MotionRC has some three bladed props that might work. I got a pair of 9 x 6.5 three blades for my Tigercat. You need to make sure your power system can handle it though - the extra blade adds extra load on the motor. What motor are you running on the spit?

 

[Trains1213_YT]

MotionRC has some three bladed props that might work. I got a pair of 9 x 6.5 three blades for my Tigercat. You need to make sure your power system can handle it though - the extra blade adds extra load on the motor. What motor are you running on the spit?

i am running the power pack c motor dont no specificly what it is.

 

[DamoRC]

The new FT radial one or the older Emax GT2215 one?

Also, are you running 3S or 4S?

 

[FDS]

A three bladed prop won’t be as efficient as a two blade.
The legacy is a high wing design with decent landing gear, it should be fine to learn on, however it’s not as easy to repair or as versatile as the Tiny Trainer, which is cheaper as well.