Spitfire76
Elite member
I finally got around to the maiden but should have not used the dolly.
Spitfire76's Build Log of the Eclipson PRADNDTL V2
- Thread starter Spitfire76
- Start date
Mr Man
Mr SPEED!
Nooooooooo!
Spitfire76
Elite member
Yes, but decided to rebuild the airframe. Also will use Bambu Lab's light weight PLA for this build as I haven't used it before. Also plan on building a steerable dolly.
cults3d.com
Takeoff dolly with steering wheels
=== INTRODUCTION: === There are many printed airplanes on the market that do not have landing gear. They are usually launched by hand, but this is a bit of a risky way and they usually need the help of another person to launch them. Likewise, models with a rear propeller are very dangerous to...
Last edited:
Mr Man
Mr SPEED!
Nice!Yes, but decided to rebuild the airframe. Also will use Bambu Lab's light weight PLA for this build as I haven't used it before. Also plan on building a steerable dolly.
Takeoff dolly with steering wheels
=== INTRODUCTION: === There are many printed airplanes on the market that do not have landing gear. They are usually launched by hand, but this is a bit of a risky way and they usually need the help of another person to launch them. Likewise, models with a rear propeller are very dangerous to...
Ooooooph!
Similar threads
