BT Aeronautics
New member
Hi everyone! I am very new to radio controlled airplanes my first plane was a Hobby Zone Sport Cub s2 after many crashes both wings had been broken, the nose had fallen off and been glued back on, the tail section was in very bad shape, the gearbox had been replaced twice, the motor had been replaced, and I had been through about 10 prop's. Surprisingly enough it was holding up very well until one day when I took it out to fly all it would do was nosedive into the ground I tried trimming it and everything else I knew to do but nothing worked, so I took it apart got the electronics out, went to dollar tree and got some rediboard, I built quite a few designs and some flew, some didn't fly well, and on one design it crashed and broke the negative wire on my battery connector. Thankfully my grandfather from Ohio was coming to visit and he is a professional at soldiering after we finished soldiering it I let the soldier cool, then I plugged it in it and turned it on but now it won't connect to the transmitter, maybe the board overheated? I don't know if anyone has ideas please let me know. Thanks
BT aeronautics.
BT aeronautics.