Solved Still have problems pluging things

[Maxx]

Now I have a link with my transmitter , but can't understand one thing ...
On my receiver , it's a AR 410 Spektrum , it's a 4 channels . There is one battery channel and channels 1,2,3 and 4 So if I plug the ESC in the battery plug ,
everything works exept the motor ... On my transmitter the throttle is channel one , do I plug the ESC in channel one for the motor to work ?
When I put a servo in channel one , it works with the throttle stick . What do I do ?

 

[Zetoyoc]

the esc will plug into the throttle channel always. the battery channel is for binding and if you want an external power source for your servos. if for instance your esc didn't have a bec built in.

 

[Maxx]

the esc will plug into the throttle channel always. the battery channel is for binding and if you want an external power source for your servos. if for instance your esc didn't have a bec built in.

Thank you my friend ! I didn't want to plug it before I made sure .

 

[Zetoyoc]

no problem, good luck and have fun