stotty1111
New member
Ok, trying to flash an FS I6 and an FS I6X to 10 channels, I have 2 cables here, one supplied by Banggood supposedly for doing this and also a SuperSimX All in one cable, this has a 4 position slide switch for different simulator I suspect, can't find a manual for these setting, anyone tell me which position to use, marking are
1 XTR G2FMS
2 G5 G6 G7
3 AEROFLY
4 PHOENIXRC
As in another post I can get to the programming screen but don't get an indication of the Firmware shown.
Thanks in advance!
1 XTR G2FMS
2 G5 G6 G7
3 AEROFLY
4 PHOENIXRC
As in another post I can get to the programming screen but don't get an indication of the Firmware shown.
Thanks in advance!
