electricRC
HbbyFLyr
So I have built a Flyer already, have another sheet of foam board laying around thinking of building scaled down Fogey or Speedster, or Delta Wing this week end. I am trying to plan out power package and am running into difficulties choosing a motor. All set ups would use Plush 12A speed controll and 500mAh LiPo battery in 2S or 3S dependent on motor.
MOTORS
Turnigy 2730-1300 250g thrust on 2S with 7x3.5 prop; 470g thrust on 3S with 9x4.7 prop
2205C 1400kv 349g thrust on 2S with 8x8.3 prop; 497g thrust on 3S with 9x5 prop
Turnigy 2730-1500 290g-410g thrust on 2S-3S 7x3.5 or smaller propeller
Turnigy Park250-1680kv 346g thrust with 7x3.5 prop or 300g thrust with 6x3 prop on 2S
Would any of these motors be a good set up? The Flyer file recommends a 24g 1300kv motor but I think I want a little more power so I can use the power pod on future planes utilizing the power pod.
MOTORS
Turnigy 2730-1300 250g thrust on 2S with 7x3.5 prop; 470g thrust on 3S with 9x4.7 prop
2205C 1400kv 349g thrust on 2S with 8x8.3 prop; 497g thrust on 3S with 9x5 prop
Turnigy 2730-1500 290g-410g thrust on 2S-3S 7x3.5 or smaller propeller
Turnigy Park250-1680kv 346g thrust with 7x3.5 prop or 300g thrust with 6x3 prop on 2S
Would any of these motors be a good set up? The Flyer file recommends a 24g 1300kv motor but I think I want a little more power so I can use the power pod on future planes utilizing the power pod.