Help! Swappable with a Flyzone Beaver tail section.

Ryan O.

Out of Foam Board!
I have a spare Flyzone Turbo Beaver horizontal and vertical stabilizer which can't go on the plane anymore. I wanted to put it on a Flite Test design, but not the Bushwacker or Storch because I have built those already. The rudder system is strange and I couldn't figure out how the internals work on the plane so I may have to attach one to the control surface with Ply reinforcements.
 

Ryan O.

Out of Foam Board!
Maybe you could try the speedster or the edge or the simple cub.
Cool idea, but unfortanetly it is for a 1.5 m aircraft and it probably works for down to a 1.3 aircraft before being oversized and a little too stable.
 

Ryan O.

Out of Foam Board!
Maybe you could try scaling it up.
That is actually a good idea,
If I scale up the Cub it could look like a turbo beaver. I also saw that the legacy is close to the right size so in the next year or so I will use it on one or the other. I will have two C pack engines by then because of the De Havilland Dove that will fly in October and at that same event is a Frankenplane challenge. Thanks:)