Aireal Anarchist
Elite member
Hi guys
bought a Taranis qx7 Access came with the R9m module.....the instructions are 1 page and almost NON EXISTENT compared to the couple QX7 setup videos I have watched
the qx7Access according to the manufacturer has diff firmware, I cant find hardly any instructions for the qx7 Access model
should I return this and get the QX7? Im lost.....I asked the manufacturer if the QX7 videos on youtube would apply to this access version, as an answer the clowns sent me an instruction link (see below) to a controller that looks like an XBOX controller that is it just a link and said use THIS video , so at this point I have zero confidence in getting proper information from them
this is what I bought
yet the manufacturer wants me to use the instructions and firmware and SD card files for this xbox type controller....and well... I dont trust them, they dont seem to care.... no explanations and piss poor instructions
I dont even know what or why to use openTX and what that will accomplish but before I even go down that road I again have the same questions ......will the QX7 ACCESS with this different firmware FRsky tells me the QX7 Access has work with the OpenTX software??
anyone here have a QX7 Access version that can shed some light on this....or should I return it for the older QX7 version and jump thru the flashing hoops etc ....at least I could confidently follow the youtube video instructions
and I havent begun to address the slim+ OTA receiver it has about 25 wires instead of plug pins I am accustomed to, nor a conventional wiring diagram that I am used to following
so I thought I would ask here since the people that made it dont seem to want to help
thanks for looking
bought a Taranis qx7 Access came with the R9m module.....the instructions are 1 page and almost NON EXISTENT compared to the couple QX7 setup videos I have watched
the qx7Access according to the manufacturer has diff firmware, I cant find hardly any instructions for the qx7 Access model
should I return this and get the QX7? Im lost.....I asked the manufacturer if the QX7 videos on youtube would apply to this access version, as an answer the clowns sent me an instruction link (see below) to a controller that looks like an XBOX controller that is it just a link and said use THIS video , so at this point I have zero confidence in getting proper information from them
this is what I bought
yet the manufacturer wants me to use the instructions and firmware and SD card files for this xbox type controller....and well... I dont trust them, they dont seem to care.... no explanations and piss poor instructions
I dont even know what or why to use openTX and what that will accomplish but before I even go down that road I again have the same questions ......will the QX7 ACCESS with this different firmware FRsky tells me the QX7 Access has work with the OpenTX software??
anyone here have a QX7 Access version that can shed some light on this....or should I return it for the older QX7 version and jump thru the flashing hoops etc ....at least I could confidently follow the youtube video instructions
and I havent begun to address the slim+ OTA receiver it has about 25 wires instead of plug pins I am accustomed to, nor a conventional wiring diagram that I am used to following
so I thought I would ask here since the people that made it dont seem to want to help
thanks for looking
Last edited: