Hai-Lee
Old and Bold RC PILOT
I have built and flown 3 versions of a canard based upon the original FT Tiny Trainer and do not have the facilities to provide the requirements for a full FT article.
If anyone wishes to build and experiment with the designs wishing to eventually publish please advise as I will gladly pass to you the design information around which you can experiment.
The designs range from a 3 channel 2 servo unit as shown above to a full house 4 channel design.
My own next step is to attempt to reduce weight by using a detachable above wing power pylon to bring the weight forward and reduce the nose weight added in the initial design.
Flying is great!!! Crashing is just the inevitable consequence.
Bob
If anyone wishes to build and experiment with the designs wishing to eventually publish please advise as I will gladly pass to you the design information around which you can experiment.
The designs range from a 3 channel 2 servo unit as shown above to a full house 4 channel design.
My own next step is to attempt to reduce weight by using a detachable above wing power pylon to bring the weight forward and reduce the nose weight added in the initial design.
Flying is great!!! Crashing is just the inevitable consequence.
Bob