avengerx99
New member
Hey everyone, I'm having problems with some tiny whoop cameras. At least I'm assuming its the cameras. Flight times are down to about 20 seconds on a fully charged battery no matter what I do, the whoop just decides its done. I have tested all kinds of batteries, new and old, I've tried many things to fix it. I think it has to do with the AIO camera. The whoop flies fine with the camera on just not soldered, and the camera gets really hot after about a minute of being plugged in. The confusing thing is I'm experiencing this issue with 5 different cameras, and I have tried them on over 5 different whoops(some with brand new boards). One camera is brand new, never been used, and when I solder to a brand new Eachine e013 board it gets too hot to touch after about a minute.
I have no idea whats happening here. I have used these same whoops and cameras before and they have lasted months with no problem. What would cause these cameras to overheat like this? I've tried everything I can think of to fix this problem, but can't figure it out.
I have no idea whats happening here. I have used these same whoops and cameras before and they have lasted months with no problem. What would cause these cameras to overheat like this? I've tried everything I can think of to fix this problem, but can't figure it out.