Innaviation
Well-known member
I have been flying a inductrix FPV for quite a while and I recently decided to upgrade to Tiny Whoop special sauce motors and a 255 mah mylipo with the jst 2.0 connector and it worked fine for one flight but then I took it to flite fest. When I tried to take off for a Tiny whoop race it flew forward and took a turn and it immediately dropped and didn't have enough power to take any turns at all. I assumed this was the lvc so I did the lvc mod but I still had the same issues so I have to come to the forums once again and get the never ending help and hope I can fix the problem, without buying a new Tiny Whoop.
In case it helps I unplugged the camera and the drone flew fine, so this maybe part of the issue.
In case it helps I unplugged the camera and the drone flew fine, so this maybe part of the issue.
