Tricopter Yaw Gyro Reverse Question

Lpaus

Member
Hey, i just built my tricopter, but the gyro for the yaw is reversed, how do i change this so the gyro make the yaw turn in the right direction?
 

KKArioKA

Epoxi Flyer
enter the kkflashtool;

load the parameters FROM the board.

check the box for the Yaw ( or uncheck if already checked)

flash again/Write TO the board
 

KKArioKA

Epoxi Flyer
there was no box to check/uncheck for yaw

Select your FC board and USBASP correctly;

click on configure firmware

kkflash1.jpg

click on load settings

small checkboxes will appear

check/uncheck the yaw gyro

click on save


DONE !

kkflash2.jpg
 
Last edited: