tecdux
Junior Member
I was flying my quadcopter when suddenly it stops receiving the transmitter commands: it starts to fly by itself, that's it, it keeps the last information received by the receiver from the transmitter.
I put the throttle down so it would go down and I would be able to land it. When the receiver reconnected to the transmitter, the quadcopter fell down and crashed.
The most impressive was that it was just 70m far from me.
The Turnigy 9X receiver was close to some capactitors, resistances and an OSD. The 5.8ghz video transmitter was 10cm far from it, as well as the ESCs and the GPS. I didn't fly near to a high voltage/current wire or any antenna.
What could cause the interference?
http://www.youtube.com/watch?v=9WGGgQCLens&hd=1
I put the throttle down so it would go down and I would be able to land it. When the receiver reconnected to the transmitter, the quadcopter fell down and crashed.
The most impressive was that it was just 70m far from me.
The Turnigy 9X receiver was close to some capactitors, resistances and an OSD. The 5.8ghz video transmitter was 10cm far from it, as well as the ESCs and the GPS. I didn't fly near to a high voltage/current wire or any antenna.
What could cause the interference?
http://www.youtube.com/watch?v=9WGGgQCLens&hd=1