OliverW

Legendary member
Built this for my dad. The paint job I did sucks!! Anyways, hopefully it will fly tomorrow.
20190621_211047.jpg
 

357bob

New member
So I’m wondering if any one has figured out the CG location? I’m pretty new so the more I get right the easier to find what I got wrong.
 

Fuzzy0123

New member
So I’m wondering if any one has figured out the CG location? I’m pretty new so the more I get right the easier to find what I got wrong.
I just flew mine tonight and my CG was about 1 - 1.5 inches behind the leading edge and it was nose heavy. However, yours could be different and my measurements could be off. Anyways hope this helps.
 

357bob

New member
So it took a few days to hear back from Flitetest support but the plans are incorrect. It is 1/2” as stated in the video. Hope this helps someone else as well.
 

Fuzzy0123

New member
So it took a few days to hear back from Flitetest support but the plans are incorrect. It is 1/2” as stated in the video. Hope this helps someone else as well.
Huh, thats interesting, ill have to see if my plane has a off thrust angle or something.